Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WS-X6548-GE-TX Firmware Upgrade

I have a client has a WS-X6548-GE-TX blade with some bad ports.  I am replacing the blade but notice a difference in the FW, SW & HW versions from the sh mod output.  The client is concerned that a versions may create a problem.  I have searched and found 1 procedure to upgrade the firmware if the version is between 4.0 & 9.0 

Here is the show mod of the blade getting removed:

NY17RS001#show mod

Mod Ports Card Type                                             Model                     Serial No.

--- ----- --------------------------------------                           ------------------            -----------

  5    2  Supervisor Engine 720 (Active)                   WS-SUP720-3B       SADXXXXXXXX

  9   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX     SALXXXXXXXX

Mod MAC addresses                           Hw       Fw           Sw                 Status

--- ---------------------------------- ------           ------------ ------------   -------               ---------

  5  000e.84e5.f838 to 000e.84e5.f83b   4.1       8.1(3)       12.2(18)SXD3   Ok

  9  001d.45bb.f260 to 001d.45bb.f28f  11.3       7.2(1)       8.3(0.156)RO    Ok

Mod Sub-Module                      Model                      Serial                Hw     Status

--- ---------------------------               ------------------             ------------            -------   -------

  5 Policy Feature Card 3          WS-F6K-PFC3B       SADXXXXXXXX   1.1      Ok

  5 MSFC3 Daughterboard         WS-SUP720            SADXXXXXXXX   2.2      Ok

 

Mod Online Diag Status

--- -------------------

9 Pass

Here is the show mod of the blade getting installed:

Router#sh mod
Mod Ports Card Type                                              Model                     Serial No.
--- ----- --------------------------------------                            ------------------             -----------
  5    2  Supervisor Engine 720 (Active)                     WS-SUP720-3B       SADXXXXXXXX
  9   48  SFM-capable 48 port 10/100/1000mb RJ45  WS-X6548-GE-TX     SADXXXXXXXX

Mod MAC addresses                             Hw         Fw           Sw                  Status
--- ---------------------------------- ------              ------------ -------------  ------                  ---------
  5  0011.92e7.5cc4 to 0011.92e7.5cc7   4.1        7.7(1)        12.2(18)SXD7   Ok
  9  0003.feae.5d3c to 0003.feae.5d6b     7.0        7.2(1)        8.3(0.156)RO    Ok

Mod Sub-Module                      Model              Serial                Hw     Status
--- ---------------------------              ------------------ -    -----------            -------    -------
  5 Policy Feature Card 3       WS-F6K-PFC3B  SADXXXXXXXX   1.1      Ok
  5 MSFC3 Daughterboard         WS-SUP720    SADXXXXXXXX   2.2      Ok

Mod Online Diag Status
--- -------------------
  5 Pass
  9 Pass
Router#

Thanks in advance.

Mikec5000

787
Views
0
Helpful
0
Replies