cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1158
Views
0
Helpful
4
Replies

WS-X6548-GE-TX (VSS) Support

mali786
Level 1
Level 1

I form a VSS between two 6509-E chassis with sup 720. I have WS-X6548-GE-TX module in each chassis. After configuring the VSS i found that this module is not compatiable with VSS. Is there any way i can use these modules ? any upgrade or something ?

Please help.

4 Replies 4

Reza Sharifi
Hall of Fame
Hall of Fame

unfortunately, only 67xx series and 68xx is supported.  You may want to talk to Cisco to trade that in with a 6700 series line card.

http://www.cisco.com/en/US/customer/prod/collateral/switches/ps5718/ps9336/prod_qas0900aecd806ed74b.html

HTH

Thanks for your reply.

Ankur Arora
Level 1
Level 1

Hi Muhammad,

The below link contains the detailed description of the hardware requirments:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html#wp1053927

I also found this:

Product ID

(append "=" for spares)

Product Description

Minimum
Software
Versions

WS-X6548-GE-TX
WS-X6548V-GE-TX
WS-X6548-GE-45AF

48-port 10/100/1000 Mbps

RJ-45

CEF256

WS-X6548-GE-TX supports:

WS-F6K-VPWR-GE

WS-F6K-GE48-AF

WS-F6K-48-AF

WS-X6548V-GE-TX has WS-F6K-VPWR-GE

WS-X6548-GE-45AF has WS-F6K-GE48-AF or WS-F6K-48-AF

With WS-F6K-GE48-AF, supports up to 45 ports of ePoE (16.8W).

QoS port architecture (Rx/Tx): 1q2t/1p2q2t

Number of ports: 48
Number of port groups: 2
Port ranges per port group: 1-24, 25-48

The aggregate bandwidth of each set of 8 ports (1-8, 9-16, 17-24, 25-32, 33-40, and 41-48) is 1 Gbps.

With Supervisor Engine 720-10GE (not supported in VSS mode)

12.2(33)SXH

With Supervisor Engine 720
(except WS-F6K-GE48-AF or WS-F6K-48-AF)

12.2(17a)SX

WS-F6K-GE48-AF or WS-F6K-48-AF
with Supervisor Engine 720

12.2(17d)SXB

With Supervisor Engine 32

12.2(18)SXF

WS-F6K-GE48-AF or WS-F6K-48-AF
with Supervisor Engine 32

12.2(18)SXF

So this module is clearly not supported.

Thanks

Ankur

"Please rate the post, if found useful"

Yeah, i got the answer already. This module is not supported in VSS.

6748 with DFC3C is an option for VSS

Thanks for your reply.

Regards,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card