Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WS-X6548 port group/asic monitoring

Is there a way to pull utilization stats directly from the 1-Gbps asics that each group of 8 ports share on 6548 line cards?

I'd prefer not to have to manually add the stats from each port in each 8-port group to find out if we're grossly exceeding the oversubscription rate.

Thanks...

5 REPLIES
New Member

Re: WS-X6548 port group/asic monitoring

I would love to see a reply for this question.

Purple

Re: WS-X6548 port group/asic monitoring

This is the only info I could find on oversubscription for those cards.

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801751d7.shtml#ASIC

New Member

Re: WS-X6548 port group/asic monitoring

Yes, that's all I was able to find. Note that there is not a convenient way to show that stat for a group of interfaces.

Specifically:

NativeIOS

Cat6500# show counters interface gigabitEthernet | include qos3Outlost

You would need to do that for all individual interfaces on each 6548 card in the chassis. I scripted it using the clogin script from RANCID.

New Member

Re: WS-X6548 port group/asic monitoring

The same info here. Okay was looking for the silver or lazy bullet.

Bronze

Re: WS-X6548 port group/asic monitoring

me too :-)

733
Views
4
Helpful
5
Replies