09-05-2008 07:08 AM - edited 03-06-2019 01:12 AM
I am migrating our 6509 to 6509E with Native IOS. It is currently running a CatOS for the switching and IOS for the routing. When I insert the module in the new chassis running IOS it says it is an unsupported module. If this is true then what module replaces this?
09-05-2008 08:01 AM
We ran into this previously and we ended up migrating to two 2811's for cost and redundancy sake. It looks like WS-SVC-CMM-6T1 http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet0900aecd8066426f.html is the replacement, however I haven't found the official document on this. I'll see if I can find it right quick.
HTH,
JB
09-05-2008 08:06 AM
Found it....Official EOL.
HTH,
JB
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide