Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WS-X6724-SFP and prioritization

Hi All,

We have a 6513 with dual MSFC/Sup720 (12.2(17r)S2) and have ordered a WS-X6724-SFP blade (w DFC3B daughter card). The node runs CatOS.

Were hoping to run voice across one of the links into this card and have run into a possible issue - can anyone confirm if this blade supports ingress prioritization? Unable to find any info on Cisco. Marking/classification isnt an issue.

Many thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: WS-X6724-SFP and prioritization

No, the WS-X6724-SFP blade does not have an ingress priority queue. It does have an egress priority queue.

Here is the QoS structure on that linecard.

Tx-1p3q8T

Rx-1q8T (2q8T when using dCEF)

More information at:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet0900aecd801459a7.html

HTH,

__

Edison.

2 REPLIES
Hall of Fame Super Bronze

Re: WS-X6724-SFP and prioritization

No, the WS-X6724-SFP blade does not have an ingress priority queue. It does have an egress priority queue.

Here is the QoS structure on that linecard.

Tx-1p3q8T

Rx-1q8T (2q8T when using dCEF)

More information at:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet0900aecd801459a7.html

HTH,

__

Edison.

New Member

Re: WS-X6724-SFP and prioritization

Edison,

Many thanks for your help. Much appreciated.

307
Views
0
Helpful
2
Replies