Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WS-X6748-GE-TX and auto mdix

Hi,

Can I use auto mdix on WS-X6748-GE-TX card with native IOS ?

I read some information that with Catos the command is supported but nothing about IOS.

Regards

1 ACCEPTED SOLUTION

Accepted Solutions

Re: WS-X6748-GE-TX and auto mdix

According to the command reference for the Sup32 the 'mdix auto' command is available for the WS-X6748-GE-TX:

http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst6500/ios/12.2ZY/command/reference/I1.html#wp1684741

It does state the command was added in 12.2(18)ZY for the Sup32 so if you have a Sup720 or an older Sup2/MSFC2 then it might be different.

Andy

1 REPLY

Re: WS-X6748-GE-TX and auto mdix

According to the command reference for the Sup32 the 'mdix auto' command is available for the WS-X6748-GE-TX:

http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst6500/ios/12.2ZY/command/reference/I1.html#wp1684741

It does state the command was added in 12.2(18)ZY for the Sup32 so if you have a Sup720 or an older Sup2/MSFC2 then it might be different.

Andy

1008
Views
0
Helpful
1
Replies