Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

WS-X6748-GE-TX log : pm failed lock for admin change for Gix/x

Hello community,

I would like to know if someone has ever met this kind of log :

*May 10 09:28:49.416: pm failed lock for admin change for Gi9/18

I meet this log on a WS-C6509-E (s72033-ipservicesk9_wan-mz.122-33.SXH3a) on a Gig interface of a module WS-X6748-GE-TX in slot 9. I meet this log after 'no shutting' the interface even after I reset the interface to default configuration.

Thanks a lot.

Karim

2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
Cisco Employee

Re: WS-X6748-GE-TX log : pm failed lock for admin change for Gi

Hi Karim,

I think you hitted CSCsk19817 which is fixed in SXH4.

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk19817

HTH

Laurent.

Cisco Employee

Re: WS-X6748-GE-TX log : pm failed lock for admin change for Gi

Correct. The full fix comes from two different bugs ID actually and only one of them is in SXH3a. You need SXH4 to be completely safe.

HTH

Laurent.

3 REPLIES
Highlighted
Cisco Employee

Re: WS-X6748-GE-TX log : pm failed lock for admin change for Gi

Hi Karim,

I think you hitted CSCsk19817 which is fixed in SXH4.

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk19817

HTH

Laurent.

Silver

Re: WS-X6748-GE-TX log : pm failed lock for admin change for Gi

Hi Laurent,

Thanks a million for your answer, it seems we are 100% hitting this bug as we are doing a shut/no shut on the interface and loosing the access during approximately 2 minutes.

The only issue being the cisco bug details indicating the bug is fixed in 12.2(33)SXH3 (we are in SXH3a)......Maybe you have a different information in your internal databases stating the bug is resolved in SXH4 for the 6500..

Thanks again.

Karim

Cisco Employee

Re: WS-X6748-GE-TX log : pm failed lock for admin change for Gi

Correct. The full fix comes from two different bugs ID actually and only one of them is in SXH3a. You need SXH4 to be completely safe.

HTH

Laurent.

794
Views
0
Helpful
3
Replies
CreatePlease to create content