This may be a dumb question but I have not worked with these modules before...
I have 2 Core 6500 Sup 720's connecting to 2 Access 6500 Sup 32 via 10 gig.
On the Core I have the X2...on the Access I have the Xenpack. Is this a one to one relationship? Meaning that for every x2 module you have on one side you need a xenpack module on the other for the connection?
X2 optics are only supported on 6708-10Ge module. So if you have 6708 on 6509-Sup720 at core with X2 optics and Xenpack at the access, it should work. If you have another module 6704-10GE it only supports Xenpack modules, so you have to use Xenpacks both at core and acecess in that case.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...