Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Xerox Scan to PC over VLANs

I have just installed a Xerox 8560 MFP printer and as I am running 6 different vlans I don't seem to be able to get the scan to PC function working.

If a pc is on the same vlan as the scanner, it works no problem. If I try to scan to a pc on another vlan, it can't discover the pc.

I spoke to Xerox who weren't much help. They did tell me that the scanner uses SNMP and SMB to discover the pc's that it can scan to.

Is there a way to forward these packets over vlans like using a helper for DHCP?

It is a 3560G switch with (C3560-IPBASE-M), Version 12.2(25)SEE3, RELEASE SOFTWARE (fc2) software.

2 REPLIES
Silver

Re: Xerox Scan to PC over VLANs

DHCP relay agent

Configure SNMP read wright Public strig..

Regards,

Dharmesh

New Member

Re: Xerox Scan to PC over VLANs

Thanks for the reply Dharmesh, but I just wanted to check that you understood the question?

I do not need to enable DHCP over the VLANs and I also do not need to enable SNMP on the switch to monitor it.

I somehow need to route SNMP and SMB protocols over the VLANs.

Sorry if I have interpreted your reply incorrectly, if that is the case would you care to elaborate?

628
Views
0
Helpful
2
Replies
CreatePlease to create content