Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

adding license to ASA module in the FMC

I have a pair of 555X in HA mode. Each have SFR modules. I have a Virtual FMC. I added 2 URL Filtering and 2 Malware licenses and the protection license into the FMC. I have added the modules into FMC. 

 

I can't seem to allocate a URL license or Malware license to the modules. The licenses are grayed out under Devices\licenses.

 

  • License
Everyone's tags (1)
8 REPLIES
Cisco Employee

Michael,Let me look into this

Michael,

Let me look into this issue and reply to this post.

 

 

Thanks,
Merv Reyes

Acquisition Program Manager - Sourcefire

Cisco Employee

Hi Michael,I think you have

Hi Michael,

I think you have converted an existing ASA 555X sensor with SFR modules. You have a Virtual Defense center. For any sensor you need to first install "PROTECT+CONTROL" license on the DC.

You need to order the "ASA555x-CTRL-LIC=" PID, a PAK will be sent along with this PID. Upon registration of the PAK you will hash for "PROTECT+CONTROL" license.

Once you register the "PROTECT+CONTROL" license you should be able to add MALWARE and URLFilter.

 

Thanks,

V.Dhanasekaran (DD)

Business Analyst , SourceFire

New Member

I have L-ASA5545-TAMC= :

I have L-ASA5545-TAMC= : Cisco ASA5545 FirePOWER IPS, Apps, AMP and URL Licenses, which should be Protect, Control, URL and Malware, but license files received from Cisco only contain Malware and URL.

New Member

Protect and control pak comes

Protect and control pak comes in the sealed envelope inside the ASA boxes.

New Member

We already had existing 5545

We already had existing 5545-X appliances before FirePOWER was available, and we added the licensing after the fact just recently.

Cisco Employee

I think you have converted an

I think you have converted an existing ASA 555X sensor with SFR modules. For any sensor you need to first install "PROTECT+CONTROL" license on the DC.

You need to order the "ASA5545x-CTRL-LIC=" PID, a PAK will be sent along with this PID. Upon registration of the PAK you will hash for "PROTECT+CONTROL" license.

Once you register the "PROTECT+CONTROL" license you should be able to add MALWARE and URLFilter.

 

New Member

Yes, I was able to get it

Yes, I was able to get it taken care of this morning.  By default the L-ASA5545-TAMC comes with the Control license, it was an oversight on Cisco's part and it was never sent.  The TAC engineer I worked with this morning corrected the oversight.  I received the license and applied it.

Thank you for the info!

New Member

Just posting to say you saved

Just posting to say you saved me a lot of time :) too used to receiving the licences by e-mail. Thanks!

1367
Views
0
Helpful
8
Replies
This widget could not be displayed.