Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Added ACS server in MARS

Hi

i want to add ACS server in MARS . is there any other configuration in ACS Server to add into MARS or just add in it.

3 REPLIES
New Member

Re: Added ACS server in MARS

Hi,

Yes.

Install and Configure the PN Log Agent in ACS Server.Pl go through this link....

http://www.cisco.com/univercd/cc/td/doc/product/vpn/ciscosec/mars/4_3/uglc/cfgaaasv.htm#wp1082864

You have to configure in the ACS server.

Please rate this

New Member

Re: Added ACS server in MARS

Why not just configure ACS to send syslogs to MARS. That way you do not need the agent.

New Member

Re: Added ACS server in MARS

There are two main versions of ACS 3x and 4x. According to documentation (bkDcgMars.pdf for MARS 6.x) you should use pnAgent for ACS 3x with Cisco Secure ACS 3.x as reporting application in MARS and with ACS 4.x you should configure syslog client in ACS (Systeme Configuration->Logging) and use Cisco Secure ACS 4.x as reporting application in MARS.

According to my own experiences with MARS 6.0.1 ( 3066 ) and ACS 4.2(0) Build 124 Patch 8 only pnAgent variant worked for me. (I used pnAgent on ACS and Cisco Secure ACS 3.x as reporting application on MARS).

Excuse my Englis.

224
Views
5
Helpful
3
Replies
CreatePlease to create content