Could you tell me which models and versions support Data archiving through SFTP in addition to NFS? I came across this in 6.0 release doc on Cisco's web site. I have a MARS 20 running 4.3.4 and I don't see anywhere in the GUI or CLI to config SFTP. Is it available only to GEN2 appliances or will it be available to GEN1 and GEN2 once they are running 6.0?
I assume your original question was referring to the normal archive configuration, but I must say had forgotten about that command. As I understand it, those commands were primarily created to support exporting data from a gen1 appliance running 4.x to a gen2 appliance running 5.x. So, you will only find the pnexp command on Mars 4.x and you will only find pnimp on Mars 5.x. I'm not sure if the exported data is the same as the normal archive. For example, can you use pnexp manually and then at a later data do a pnrestore from it using the same box?
Maybe I don't understand what you're trying to say Farrukh, but that doesn't seem to speak to the whether pnrestore can be used on data exported with pnexp. FWIW, since this doesn't won't work on the gen2 appliance (there is no pnexp command) then it's somewhat of a pointless discussion.
Yes my original question was referring to normal archive, I just wanted to jog your memory about this option in hopes of turning up some additional info. I am happy to get the additional info on migration from GEN1 to GEN2. Thanks.
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...