One week ago due to HW failure we changed a chassis of MARS device at one customer location. However, we hold RAIDs and memory due to saved logs, configuration and data. After we purchase a new Licence File and successfully uploaded on the new MARS device, MARS don't collect logs from any device in the network. We tried to delete and add some switches but nothing had happened.
Still need some help. After some troubleshooting, I found that some services are not running on the MARS (especially pnparser). I tried with pnstart and with pnstart and than reboot, after which all stopped services become running except pnparser service.
The log from the MARS shows following:
Aug 12 14:57:26.413 2010@...@LM_WARNING@./superV|Thread 52886448:Process 'pnparser' is not active, trying restart... Aug 12 14:57:29.399 2010@...@LM_INFO@./superV|Thread 52886448:Executed command './pnparser 1506 &' returned 0
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...