MARS generates CPU/MEM reports but not Intfs' ones
I've installed an MARS 55 appliance and followed by the user guide to add 2 multi-context ASA5580 appliances w/ admin + 2 security contexts in AA failover mode.
I designed to use the mgmt0/0.30, mgmt0/0.31 and mgmt0/0.32 for the OOB mgmt purpose only with each context and had them with the "standby ip_address" configuration for failover and "no mgmt-only" on them.
Also, I designed to use the mgmt0/1.40, mgmt0/1.41, and mgmt0/1.42 for the reporting purpose (syslog, and SNMP polling) only with each context and had them with the "standby ip_address" configuration for failover and "no mgmt-only" on them.
When I checked the CPU & MEM reports pertaining to the Resource Usage, I would see the admin/Ctx1/Ctx2 CPU & Memory utilization graph.
But when I navigated the Interface Utilization ones ... it has nothing to demonstrate with "scheduled" & "submitted" fields having the timestamp information.
How can I solve this problem?
My FW configuration wrong ?
I used 4 real interfaces for each security contexts with one for outside and the other for inside.
The admin context has only the mgmt0/0.30 and mgmt0/1.40.
I also can use the MARS snmpwalk to query each context's interface MIBs.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...