Still using standalone MARS 25 for syslog analysis and troubleshooting and it does what it should (two failover pairs of ASAs). A couple of weeks ago the appliance had been accidently droped slightly. The result = dead HDD. We replaced original 250 Gb Seagate with 500 Gb Seagate, reimaged the appliance and it's stil working. However now we are experiencing an unefficient diskspace usage - MARS stores log data and events for about one week only ( used to be a couple of monts before). When I type diskusage I get the following output :
Filesystem Size Used Avail Use% Mounted on
/dev/hda2 857M 539M 275M 67% /
/dev/hda1 125M 16M 103M 14% /boot
/dev/sda6 9.9G 162M 9.2G 2% /log
/dev/sda5 9.9G 1.3G 8.1G 14% /opt
/dev/sda7 32G 6.4G 24G 22% /pnarchive
none 1012M 0 1012M 0% /dev/shm
/dev/sda8 9.9G 685M 8.7G 8% /tmp
/dev/sda9 9.9G 1.9G 7.6G 20% /u01
/dev/sda11 364G 63G 283G 19% /u02
/dev/sda10 9.9G 8.1G 1.3G 87% /u03
As you can see the diskspace in heavily underused ! Is it possible somehow to configure it to use all available diskspace ?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...