02-26-2009 07:56 AM
Hi everybody,
I'm imaging a 100E with 6.0.2.
When I do a reboot the initial startup gets stuck at "starting oracle:".
Is this a known issue?
Can someone help me with this problem
02-26-2009 08:12 AM
yes, this just take a while to boot. I have seen it take as long as 90 minutes. Also, if the device fails to perform normall after the ISO upgrade, try making a new DVD on a different PC and start over. I just wnet through this on a CSMARS-50
07-06-2009 11:53 AM
I've encountered a similar issue with a 110R.
I had to re-image the box, first had the Oracle Fail with the 6.0.2 DVD I burned, so I used the recovery DVD included with the device, this was successful, however "Starting Oracle" is taking way too long, I let it sit for over 2 hours, the activity light and HD lights flash occassionaly, but it's much too long, I'm restoring again from the included disk, and then will try another Downloaded DVD, but will burn at a slow speed this time.
Anyone else experience similar issues?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide