Cisco IP SLA Video Operations Profile Generator Tool Now Available
The Cisco IP SLA Video Operations Profile Generator Tool, a custom profile generator tool for use with the IP SLA VO capabilities, is now available. The custom profile generated with this tool can be used with Catalyst 3k switches. This tool is supported on Windows XP/Vista/7 (32/64 bit) operating systems. The installation package and instructions can be downloaded from the Cisco Medianet Knowledge Base Portal at the following URL:
You will need follow the process outlined in the Profiler Tool Guide. So after you obtain the profile data file and dnload to the Cat3k sender, you need to read this file into the system and later when configuring the IPSLA test you need to reference the new profile_file as noted below; example
Cisco IP SLA Video Operations Profile Generator Tool Now Availab
actually i used command for IPSLA in the pass, few days ago i found the generator tool, and i think that i'll want to use, but get some stuck. OK, thanks for your reply, i've gotten .pcap file for the tool.
I've one more question about IPSLA, Pls help me if you can:
IPLSA for telepresen, configuration as below, I've done with CiscoAS in the pass, but i don't understand some Number", example: packet size = 256bytes / 960 bytes ... /1400bytes (maximum). I think that mean Sender will send to responder some video traffic with different metric (like bandwidth or resolution,...) but don't know exactly what is it? Could you help me to explain?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...