Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuring RTP mediatrace on 1921 routers

Hi,

I have two 1921 IOS 15.1.4(M1) Universal Data.

I want to simulate 8 simultaneous rtp g729 voice streams between the two routers across an MPLS network. I cannot complete a mediatrace hop across the MPLS network, the two routers can ping one another.

I can complete a mediatrace hop with the routers back to back on ethernets. I cannot get them to transmit data on the ethernets with a perf-monitor media trace.

There is no data being transmitted between the routers. Can someone tell me how to get this to work?

source 172.32.1.1 destination  172.32.1.2 perf-monitor
Started the data fetch operation.
Waiting for data from hops.
This may take several seconds to complete...
Data received for hop 1
Data fetch complete.
Results:
Data Collection Summary:
  Request Timestamp: 14:14:59.892 CST Fri Dec 16 2011
  Request Status: Completed
  Number of hops responded (includes success/error/no-record): 1
  Number of hops with valid data report: 0
  Number of hops with error report: 0
  Number of hops with no data record: 1
Detailed Report of collected data:
    Number of Mediatrace hops in the path: 1

    Mediatrace Hop Number: 1 (host=9803-rvoip-2, ttl=254)
      Metrics Collection Status: Fail (19, No statistic data available for reporting)
      Reachability Address: 10.248.255.238
      Ingress Interface: Vl94
      Egress Interface: None
      Metrics Collected:

9803-rvoip-1#$ source 172.32.1.1 destination  172.32.1.2 perf-monitor
Started the data fetch operation.
Waiting for data from hops.
This may take several seconds to complete...
Data received for hop 1
Data fetch complete.
Results:
Data Collection Summary:
  Request Timestamp: 14:16:08.152 CST Fri Dec 16 2011
  Request Status: Completed
  Number of hops responded (includes success/error/no-record): 1
  Number of hops with valid data report: 0
  Number of hops with error report: 0
  Number of hops with no data record: 1
Detailed Report of collected data:
    Number of Mediatrace hops in the path: 1

    Mediatrace Hop Number: 1 (host=9803-rvoip-2, ttl=254)
      Metrics Collection Status: Fail (19, No statistic data available for reporting)
      Reachability Address: 10.248.255.238
      Ingress Interface: Vl94
      Egress Interface: None
      Metrics Collected:

9803-rvoip-1#$ source 172.32.1.1 destination  172.32.1.2 perf-monitor
Started the data fetch operation.
Waiting for data from hops.
This may take several seconds to complete...
Data received for hop 1
Data fetch complete.
Results:
Data Collection Summary:
  Request Timestamp: 14:17:13.932 CST Fri Dec 16 2011
  Request Status: Completed
  Number of hops responded (includes success/error/no-record): 1
  Number of hops with valid data report: 0
  Number of hops with error report: 0
  Number of hops with no data record: 1
Detailed Report of collected data:
    Number of Mediatrace hops in the path: 1

    Mediatrace Hop Number: 1 (host=9803-rvoip-2, ttl=254)
      Metrics Collection Status: Fail (19, No statistic data available for reporting)
      Reachability Address: 10.248.255.238
      Ingress Interface: Vl94
      Egress Interface: None
      Metrics Collected:

1 REPLY
New Member

Configuring RTP mediatrace on 1921 routers

I should add that the 1921s are self managed CER peered with a provider MPLS PER on 768k frac T1 access circuits.

887
Views
0
Helpful
1
Replies
CreatePlease to create content