I've been doing a lot of researching regarding medianet. I would like to entertain introducing a small footprint in the environment, but need a few questions answered.
1. Do Cisco phones have MSI installed in order to be media net announcers/flow producers? If so, what models and firmware versions if applicable?
2. Can media net be enabled and used for QoS on an access switch for an initial implementation with no upstream speakers? So, use medianet on the access switch and just pass along the QoS markings to the upstream distribution switch to fall in line with existing enterprise QoS policy.
3. Taking an access port for example. With medianet enabled on the access port, can you apply an ingress policy that has a medianet class or am I totally missing the point? Example config below.
! class-map match-any MEDIA-CONTROL match application cisco-phone signaling-type sip match application cisco-phone signaling-type h323 match application cisco-phone signaling-type skinny match application cisco-phone signaling-type mgcp ! class-map match-any MEDIA-PAYLOAD match application cisco-phone transport-type rtp !
policy-map INBOUND-MARKING class MEDIA-PAYLOAD set dscp ef class MEDIA-CONTROL set dscp af31 class class-default set dscp 0
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...