I've been doing a lot of researching regarding medianet. I would like to entertain introducing a small footprint in the environment, but need a few questions answered.
1. Do Cisco phones have MSI installed in order to be media net announcers/flow producers? If so, what models and firmware versions if applicable?
2. Can media net be enabled and used for QoS on an access switch for an initial implementation with no upstream speakers? So, use medianet on the access switch and just pass along the QoS markings to the upstream distribution switch to fall in line with existing enterprise QoS policy.
3. Taking an access port for example. With medianet enabled on the access port, can you apply an ingress policy that has a medianet class or am I totally missing the point? Example config below.
! class-map match-any MEDIA-CONTROL match application cisco-phone signaling-type sip match application cisco-phone signaling-type h323 match application cisco-phone signaling-type skinny match application cisco-phone signaling-type mgcp ! class-map match-any MEDIA-PAYLOAD match application cisco-phone transport-type rtp !
policy-map INBOUND-MARKING class MEDIA-PAYLOAD set dscp ef class MEDIA-CONTROL set dscp af31 class class-default set dscp 0
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...