We just implemented Prime Infrastructure at work and wanted to configure NetFlow. Most of our old switches do not support NetFlow, but do support Performance Monitor.
When the devices are configured with Performance Monitor and send this to PI via Flexible NetFlow, PI receives it, but the NetFlow applets in PI do not use them. They use the NetFlow data received via "Native NetFlow", but not via Performance Monitor - even though I can confirm that PI is receiving flow info.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...