I am Mazlan and work for one of ISP in Malaysia. We would like to discover metro ethernet technologies.
We would like to use our current backbone network to create this metro network and we are planning to use cat3750.
The design is something like this.
R1 and R2 is in different location but will be running on same VLAN (with help of cat3750). Let say there is customer connected to R1 and their branch at R2, they will only feel they are in same LAN, but actly they are in different location.
We need some opinion of builidng this network. I need help for the configuration in cat3750 as well in the router. We have no experince in this technologies.
Perhaps somebody whos is interested to help me out can email me at email@example.com
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...