On a ME340x Software (ME340x-METROIPACCESSK9-M), Version 12.2(44)SE, RELEASE SOFTWARE (fc1) with less then a 1G traffic summary on all ports a have that problem when atach to console ( telnet and ssh didn`t work )
%% Low on memory; try again later
on it i have ospf with less then 100 routes ( in area 0 ) and qinq at the one gig interface . Evrything is working l2 and l3 but i dont have any access to the device ....
Depending on *what* is eating the memory, you might be able to free enough to get in by shutting down all dynamic routing from the router's neighbours (like "BGP neighbours shutdown", OSPF interface passive, etc.)
If it's just a bug and there is no free memory / no large enough chunk left, then you'll need to reboot...
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...