With proper regeneration, you should be able to achieve your goal. I think without regeneration, you should be able to chain a few OADM1-xxxx together with MUX8A. Such as Cat6500|MUA8A -> 3560E|OADM1-1490 -> 3560E|OADM1-1510 -> 3560E|OADM1-1530. I am not sure how many you can add in a chain without regeneration. In short distance, you might be able to put all together without regeneration.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...