Re: Differentiating between 802.1q and 802.1ad frames
Thanks a lot for your suggestion.
I have played around with this feature and unfortunately it looks like the ingress interface has to be configured as a dot1q tunnel in order for the match inner vlan option to work. We want the interface to be a plain 802.1q trunk interface. Also, to use this feature we would have to know the vlan numbers and match on each one. In our environment the interface will be a UNI to a customer so we will not know (or want to know) the inner vlans being used.
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...