Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Does the pppoe enable command available in cisco asr 901 router with a 15.4(3)S OS version ?

Hi,

I am currently trying to configure my ASR 901 router with 15.4(3) OS version to use  the PPPoE over one of the Gigabithernet port, but I'm facing some issues because in every tutorial I have seen, they specify to perform the "pppoe enable global" command on gigabitethernet interface but with my version, I can't find the pppoe command.
So, is there any other command or configuration to set the pppoe over gigabit ethernet or something or is there something I'm missing.

Below the configuration found:

Server(config)#bba-group pppoe global
Server(config-bba-group)#virtual-template 1
Server(config)#interface virtual-template 1
Server(config-if)#ip address 192.168.12.2 255.255.255.0
Server(config-if)#mtu 1492
Server(config-if)#peer default ip address pool CLIENT
Server(config)#ip local pool CLIENT 192.168.12.1

Thanks a lot

 

  • Metro
114
Views
0
Helpful
0
Replies