Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

EoMPLS vs. VPLS (Part 2)

Hi Sirs:

Please answer each question separately:

5) Are L2 broadcast frames propagated through an EoMPLS connection? If yes, how can it be avoided? What about VPLS?

6) For an SP offering MPLS L3 VPNs now, which is easier and cheaper to implement, EoMPLS or VPLS?

7) Is it VPLS supported over GSR12000? Cisco 76xx? What IOS version?

8) If I want to use EoMPLS and 802.1Q tunneling to transport “n” non-routed VLANs from site A to site B, but I also need to make routing between some of these VLANs , Where Should I implement that routing, in the SP cloud or in some of the sites? Why? Please suggest.

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: EoMPLS vs. VPLS (Part 2)

Regarding your question number 7, the answer is yes. 7600 series routers support for VPLs.

I think the following document will answer to many of your VPLs questions. If the following document does not answer your questions, then let me know so that I will provide you with a little more detailed answer.

http://www.cisco.com/en/US/products/hw/routers/ps368/products_white_paper09186a00801df1df.shtml

1 REPLY
New Member

Re: EoMPLS vs. VPLS (Part 2)

Regarding your question number 7, the answer is yes. 7600 series routers support for VPLs.

I think the following document will answer to many of your VPLs questions. If the following document does not answer your questions, then let me know so that I will provide you with a little more detailed answer.

http://www.cisco.com/en/US/products/hw/routers/ps368/products_white_paper09186a00801df1df.shtml

383
Views
0
Helpful
1
Replies
CreatePlease login to create content