Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Ethernet Pseudowire over IP/MPLS

Hello there,

Anyone has any case study example regarding transmitting Ethernet PW over MPLS/IP core network?

Thanks

3 REPLIES
New Member

Ethernet Pseudowire over IP/MPLS

Do you have an example you would like for me to share a configuration for.

IE.

(ME3800switch)==(7609router)==MPLS Core==(7609router)==(ME3750switch)

Need to carry point to point 1gig circuit from CustomerA Site1 to CustomerA Site 2

or perhaps a point to multipoint Bank/Branch situation.

I have almost every configuration possible existing in my core network today.

Regards

Jude Bryant

Network Engineer

Pioneer Telephone

New Member

Re: Ethernet Pseudowire over IP/MPLS

Yep.

Are you aggregating on SVI's or the physical interfaces on your PE routers? Port-based or Vlan-based?

Sent from Cisco Technical Support iPad App

Re: Ethernet Pseudowire over IP/MPLS

Hi chris,

Here is a link gives you brilliant explanation and also exampls configuration for EoMPLS and other stuff.

In fact this is taken from the  Layer 2 VPN Architectures book by Cisco Press. I found it extremely helpful. It covers both the modes RAW mode(port based) and TAGGED mode(vlan based mode)

http://fengnet.com/book/Layer%202%20VPN%20Architectures/ch07.html#idd1e13647

HTH

Kishore

2511
Views
0
Helpful
3
Replies