Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

EVC Configuration Comparison 7600 vs ASR9k

Just curious to know if anyone has migrated from the 7600 metro series routers to ASR9ks.

specifically, how to translate the following from 7600 to ASR


ingress/egress traffic tagged with vlan200((7600/lo01.1.1.1/int gig3/0/0)(trunk port te1/0/0))<=mpls=>((trunk port te1/0/0)(7600/lo02.2.2.2/int gig3/0/0))ingress egress traffic tagged with vlan200


7600 router with lo0 of 1.1.1.1
using ldp

interface gig3/0/0
  service instance 200 ethernet
  encapsulation dot1q 200
  xconnect 2.2.2.2 999 encapsulation mpls

7600 router with lo0 of 2.2.2.2
using ldp

interface gig3/0/0
  service instance 200 ethernet
  encapsulation dot1q 200
  xconnect 1.1.1.1 999 encapsulation mpls

whats the equivalent on ASR9k?

static or dynamic point to point cross-connects?

?????
l2vpn
xconnect group vlan200_traffic

interface gig0/0/0/3.200 l2transport
encapsulation dot1q 200
neighbor 2.2.2.2 pw-id 999

or

l2vpn
xconnect group vlan200_traffic
p2p vlan200
interface gig0/0/0/3.200
neighbor 2.2.2.2 pw-id 200

not really sure

Regards
Jude

Everyone's tags (4)
1 REPLY
New Member

Re: EVC Configuration Comparison 7600 vs ASR9k

        Answered   

1702
Views
0
Helpful
1
Replies
CreatePlease login to create content