Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Gi0/25 on 24-th port ME3800

Hi eveyone,

Have strange situation in my lab: 24 port switch ME-3800X-24FS-M switch IOS shows 26 Gigabit ports.

Can someone explain me, why there are 25 Gig ports in output?

System image file is "flash:me380x-universalk9-mz.153-1.S.bin"

Last reload reason: Unknown reason

License Level: MetroEthServices

License Type: Permanent

Next reload license Level: MetroEthServices

cisco ME-3800X-24FS-M (PowerPC8572) processor (revision B0) with 1015808K/32760K bytes of memory.

Processor board ID FOC1645X1F8

Last reset from power-on

1 Virtual Ethernet interface

26 Gigabit Ethernet interfaces

2 Ten Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

1536K bytes of flash-simulated non-volatile configuration memory.

----

Model number                    : ME-3800X-24FS-M

---

#show interfaces status

Port           Name             Status       Vlan         Duplex  Speed Type

Gi0/1                     disabled     4093         auto   auto 10/100/1000BaseTX SFP

Gi0/2                     connected    trunk        full    100 10/100/1000BaseTX SFP

Gi0/3                     connected    2194         full    100 10/100/1000BaseTX SFP

Gi0/4                     connected    677        a-half   a-10 10/100/1000BaseTX SFP

Gi0/5                     connected    trunk        full   1000 10/100/1000BaseTX SFP

Gi0/6                     disabled     4093         auto   auto 10/100/1000BaseTX SFP

Gi0/7                     disabled     4093         auto   auto 10/100/1000BaseTX SFP

Gi0/8                     connected    2521         full    100 10/100/1000BaseTX SFP

Gi0/9                     connected    33         a-full  a-100 10/100/1000BaseTX SFP

Gi0/10                    connected    33           full     10 10/100/1000BaseTX SFP

Gi0/11                    connected    2197         full   1000 10/100/1000BaseTX SFP

Gi0/12                    connected    2517         full    100 10/100/1000BaseTX SFP

Gi0/13                    connected    2522         full    100 10/100/1000BaseTX SFP

Gi0/14                    disabled     4093         auto   auto 10/100/1000BaseTX SFP

Gi0/15                    connected    trunk      a-full a-1000 10/100/1000BaseTX SFP

Gi0/16                    connected    2523         full    100 10/100/1000BaseTX SFP

Gi0/17                    connected    trunk      a-full a-1000 10/100/1000BaseTX SFP

Gi0/18                    disabled     4093         auto   auto 10/100/1000BaseTX SFP

Gi0/19                    connected    trunk      a-full a-1000 10/100/1000BaseTX SFP

Gi0/20                    connected    trunk        full   1000 10/100/1000BaseTX SFP

Gi0/21                    connected    trunk      a-full a-1000 10/100/1000BaseTX SFP

Gi0/22                    connected    trunk      a-full a-1000 10/100/1000BaseTX SFP

Gi0/23                    disabled     4093         auto   auto 10/100/1000BaseTX SFP

Gi0/24                    connected    175          full    100 10/100/1000BaseTX SFP

Gi0/25                    disabled     4093         auto   auto unknown

Te0/1                     connected    trunk        full    10G

Te0/2                     connected    trunk        full    10G

Po1                       connected    trunk      a-full    10G

1 REPLY
New Member

Re: Gi0/25 on 24-th port ME3800

It's a bug. Check your release notes and make sure you are on current release.

Sent from Cisco Technical Support iPhone App

879
Views
0
Helpful
1
Replies
CreatePlease login to create content