Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to implement a Juniper like LDP over RSVP in Cisco Routers

If a PE does not support RSVP-TE,it can still take advantage of the benifits provided by TE in the core by config LDP over RSVP on a Juniper M series

router. I learn from the Cisco whitepaper "Deploying ganranteed-bandwidth service with MPLS " that Cisco products may support this kind of application too,who knows how to config it ?

4 REPLIES
New Member

Re: How to implement a Juniper like LDP over RSVP in Cisco Route

Cisco Employee

Re: How to implement a Juniper like LDP over RSVP in Cisco Route

Hi there,

LDP over Rsvp: Do you mean LDP over TE tunnels? If so, IOS supports that.

Enable LDP on the tunnel intf. On the headend, config:

int tu0

tag ip

mpls label proto ldp

Enable tailend to accept directed LDP session., On the tailend config:

mpls ldp discovery targeted-hello accept

Please let me know if this answers your question. If you have further questions pls let me know.

Best regards,

Gopal

New Member

 Hello,I am looking for this

 

Hello,

I am looking for this configuration on IOS-XR. Do you have a link or pointer on how to do this?

We basically want to implement LDP tunneling through RSVP-TE at the core.  Edge PEs have LDP enabled, and Core routers are configured to provide RSVP-TEs. 

Kate

 

New Member

Re: How to implement a Juniper like LDP over RSVP in Cisco Route

hello Chen

I come from shenzhen too,glad to see your post here,you could use the Cisco's search with the "MPLS" keywords then could find the info required,if you have more questions or need further assistance then email me at best@lightrend.com ,our company also in network industry as same your Huawei,i quite admire you and your company,

1742
Views
0
Helpful
4
Replies