Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

icmp used for keep alive

Hi,

We have a 3ppp product that is connected to our IOS_XR router.

This 3ppp node use icmp with ttl=1 to check the inverness.

If the node send more then 100 icmp/s the router stop to answer.

is it possible with command to set how many icmp message/s should be allowed?

BR Niklas

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: icmp used for keep alive

The drops you are getting are related to LPTS policer violations. These are normal and in place to restrict packet processing on LC/RP CPUs. The workaround will be to reduce the size of ICMP packet that the 3ppp node sends to the router.

1 REPLY
Silver

Re: icmp used for keep alive

The drops you are getting are related to LPTS policer violations. These are normal and in place to restrict packet processing on LC/RP CPUs. The workaround will be to reduce the size of ICMP packet that the 3ppp node sends to the router.

189
Views
0
Helpful
1
Replies