IOS that supports WS-X6582-2PA,PA-POS-10C3(SFP-IR-SM),and OSM-2OC12-POS-SI+
Could someone advise which IOS images on 7606 can support WS-X6582-2PA,PA-POS-10C3(SFP-IR-SM),and OSM-2OC12-POS-SI+?
The current IOS is c6sup22-psv-mz.121-13.E6.bin.In order to support WS-X6582-2PA and PA-POS-1OC3(SFP-IR-SM),it?s suggested to upgrade to IOS12.2.18.We upgraded to s222-ipservices_wan-mz.122-18.SXF5.bin.It supports WS-X6582-2PA and PA-POS-1OC3(SFP-IR-SM).But when we installed OSM-2OC12-POS-SI+ it crashed.
Re: IOS that supports WS-X6582-2PA,PA-POS-10C3(SFP-IR-SM),and OS
Going by the hardware modules you have installed and the platform, the current IOS being used looks to be fine from compatibility matrix. Doesnt look like an IOS/Hardware compatibility issue.
If it may help you, for a customer we have deployed a similar set of modules configuration with 12.2(33)SRA and it works fine. The choice of SRS wasnt for this compatibility but for some other required features.
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...