Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

ME3600 doens't work BRIDGE::MIB

Hi,

we get new ME3600 switch. But it has one problem. It doesn't support BRIGE::MIB (1.3.6.1.2.1.17.4.3.1.2) as it should be.

According this document:

http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/12.2_52_ey/configuration/guide/swmibs.html

Everithing should work as it use to be:

For VLAN1 we use out usual community for example:

snmp-server community monitoring RO

So for all other VLAN we use monitoring@X , where X is VLAN number.

But in ME3600 no such feature, there is only onformation for VLAN1, so it is impossible to track MAC address from all VLAN exept VLAN1.

We use lots of other CIsco models in our network and everithing works ok (from  BRIDGE::MIB point i mean : ) )

Is it BUG? is there any workaround?

Does anyone meet similar trouble?

Regards,

Jevgenij

1 REPLY

ME3600 doens't work BRIDGE::MIB

Info from Cisco documentation:

http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/12.2_52_ey/configuration/guide/swmibs.html

MIB List

BGP4-MIB

BRIDGE-MIB


Note The  BRIDGE-MIB supports the context of a single VLAN. By default, SNMP  messages using the configured community string always provide  information for VLAN 1. To obtain the BRIDGE-MIB information for other  VLANs, for example VLAN x, use this community string in the SNMP  message: configured community string @x.

http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/12.2_52_ey/configuration/guide/swmibs.html

837
Views
0
Helpful
1
Replies