LAN-to-LAN connection between two sites. The distance between two sites are app 60Km., through a Leased Line from ISP of speeds from 8Mbps to 155Mbps. Each router should include SDH Interface Card as per ISP specification.What all of suggest for this. pl advice me.
The simplest and most flexible solution in this case is Cisco7200VXR/NPE-G1. You will need STM-1 or another kind of interface - you had better to consult with your service provider what is interface specification you will connect to.
Then you can use EoMPLS or L2TPv3 to complete with LAN-to-LAN connectivity. If you need L2 of course.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...