02-22-2012 05:19 PM
Hi
I have to configure the EVC on 7613 with ES+20G.
But i can not configure it because there is no the encapsulation configuration on 7613.
So i check the relese12.2(SR) configuration note and then i know there is the encapsulation configuration on 7613.
I have used the 12.2(33)SRD4 version.
So can you teach me the WHY and HOW to configure it on 7613.
Thank you
02-25-2012 01:51 AM
Hi,
what do you mean there is no encapsulation on 7613?
The config on 7613 does not differ from any other 7600 router.
The EVC configuration will be something like this:
Interface GigabitEthernetx/x
service instance 15 ethernet
encapsulation dot1q 2000 second-dot1q 20
rewrite ingress tag pop 2 symmetric
bridge-domain 110
!
service instance 40 ethernet
encapsulation dot1q 333
rewrite ingress tag pop 1 symmetric
bridge-domain 32 split-horizon
for more have a look at:
Cisco 7600 Series Ethernet Services Plus (ES+) and Ethernet Services Plus T (ES+T) Line Card Configuration Guide
Configuring Layer 1 and Layer 2 Features
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap4.html
Riccardo
02-28-2012 03:15 PM
Thank you for your help...
you are very kind
Thank you
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: