I think 802.1x is just used for authentication, and you can combine that along with the accounting service provided by AAA for billing. You can use the 'aaa authentication dot1x' command to specify the methods for authentication and configure the usual AAA accounting commands.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...