Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

q-in-q router 0x8100

Hi

I would like use the ethertype 0x8100 for the s-vlan tag.

i am using an 3845 Router.

example:

interface gig0/1

..

interface gig0/1.1

ip address x.x.x.x x.x.x.x

encapsulation dot1Q 500 second-dot1q 100

because its not possible to enter at the main-interface the command:

"dot1q tunneling ethertype 0x8100"

only ethertype 0x88a8 and 0x9100 is allowed!

so i ommited this command!

does this config work?

and which ethertype uses the router?

thanks

  • Metro
4 REPLIES
Silver

Re: q-in-q router 0x8100

I have seen this command work with Cisco IOS XR software. http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/qinq.html

New Member

Re: q-in-q router 0x8100

thats right!

but the XR-Software isn't working with 3845 Router!

Silver

Re: q-in-q router 0x8100

By default Cisco uses 0x8100, which IANA assigned to 802.1Q.

0x88a8 and 0x9100 are not assigned by IANA.

See: http://www.iana.org/assignments/ethernet-numbers

Hope this helps.

New Member

Re: q-in-q router 0x8100

Hi

with infistream i could intercept the frames, which the router is sending into the lan.

so i can see now, that the frames are really double-tagged with ethertype 0x8100.

thanks

885
Views
2
Helpful
4
Replies
This widget could not be displayed.