I have a project were I need an extended LAN to use VMWare Replication but my service provider gives me just One VLAN on a Point-to-Point link (from site A to site B). From my side I have one 3750 on both sides so I was wondering if I can configure QinQ or something like that to pass more than one VLAN over the service provider network.
If this possible? any configuration example? thanks alot!
If your provider is providing a vlan aware service you can stack on your end, everything inside the agreed outer tag (from the providers perspective) will be transported transparently. If its a port based service you can tag however you like as the provider will do the stacking on the NTE regardless of your headers.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...