06-14-2007 12:47 AM
We have a DPT ring with 10 10720 routers on it. The ring is connected to an OC-48 SRP interface on each router.
Voice traffic enters and leaves the 10720 on a Fast Ethernet interface; incoming voice has DSCP46 marking on it, and a strict-priority queue is set up outbound on the Fast Ethernet interface.
Is it possible to apply some form of priority queueing on the SRP1/1 interface on the 10720? I have been trying to find something definite about this but so far I have failed.
Solved! Go to Solution.
06-14-2007 11:30 PM
Router# conf t
Router(config)# interface srp 2/0
Router(config-if)# srp priority-map transmit 5
Router(config-if)# end
Please check this configuration guide, this should help you do the priority or other tasks with the SRP interface.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/srpapsgs.htm
HTH-Cheers,
Swaroop
06-14-2007 11:30 PM
Router# conf t
Router(config)# interface srp 2/0
Router(config-if)# srp priority-map transmit 5
Router(config-if)# end
Please check this configuration guide, this should help you do the priority or other tasks with the SRP interface.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/srpapsgs.htm
HTH-Cheers,
Swaroop
06-15-2007 02:14 AM
Hi Swaroop
Many thanks for your very useful reply. I have been looking for this kind of information for a long time!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide