Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QoS on OC-48 SRP interface on 10720 router

We have a DPT ring with 10 10720 routers on it. The ring is connected to an OC-48 SRP interface on each router.

Voice traffic enters and leaves the 10720 on a Fast Ethernet interface; incoming voice has DSCP46 marking on it, and a strict-priority queue is set up outbound on the Fast Ethernet interface.

Is it possible to apply some form of priority queueing on the SRP1/1 interface on the 10720? I have been trying to find something definite about this but so far I have failed.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: QoS on OC-48 SRP interface on 10720 router

Router# conf t

Router(config)# interface srp 2/0

Router(config-if)# srp priority-map transmit 5

Router(config-if)# end

Please check this configuration guide, this should help you do the priority or other tasks with the SRP interface.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/srpapsgs.htm

HTH-Cheers,

Swaroop

2 REPLIES

Re: QoS on OC-48 SRP interface on 10720 router

Router# conf t

Router(config)# interface srp 2/0

Router(config-if)# srp priority-map transmit 5

Router(config-if)# end

Please check this configuration guide, this should help you do the priority or other tasks with the SRP interface.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/srpapsgs.htm

HTH-Cheers,

Swaroop

New Member

Re: QoS on OC-48 SRP interface on 10720 router

Hi Swaroop

Many thanks for your very useful reply. I have been looking for this kind of information for a long time!

141
Views
5
Helpful
2
Replies