I have a question regarding the excessive bandwidth allocation for LLQ under IOS XR. When configuring bandwidth remaining under class, is the bandwidth not used by priority queue at the moment part of the excessive bandwidth? Another question is, for priority confiugration, it forces an explicit policer to be configured, does it mean even during uncongested period the packet in priority queue that exceeds the rate will be discarded? Please see the code is per below.
I am not sure about the first question. But for your second question, hardware platforms in Cisco support Always-ON LLQ which mean even if there is no congestion on the link and the bandwdith limit on LLQ is exceeded it drops the packets.
Question: Have the phone connected and can ring out-but no sound coming from the handset - analog home phone - phone makes connection and pick up at the other end is ok. Can you help?
Question: Have the phone connected and can ring out-but no sound coming from the handset - analog home phone - phone makes connection and pick up at the other end is ok. Can you help?Answer
iPXE boot in ASR9K
This document applies to NCS5500 and ASR9000 routers and has been verified as such.
traditional ECMP or equal cost multipath loadbalances traffic over a number of available paths towards a destination. When one path fails, the traffic gets r...