support for more than one 2-port GE SPA in SIP400?
I have a small problem... I need to install two 2-port GE SPA in a SIP400 card. I know I can't use line speed at all four GE ports, but it is acceptable for now, since the setup is only for a show period of time.
However, I've discovered that I'm unable to transmit any data across more than 2 ports simutaniously.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...