I've just received a ATM connection through a public network with a VC-3 container (SDH).
I have an PA-A2-4E1XC-OC3SM in a 7206 that should connect to another one at the other end.
I've been used to working with PVP's but cannot seem to find out how to relate to a vc-3 container ? since i cannot configure the VC-3 parameters or even SDH as framing on a 7206 with the above mentioned card.
Will this setup work? and how to map a 7200 into a vc-3 container ?.
Finally, will the sonet/sdh be an issue when running at OC3 (actually E3) speeds ?
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...