cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
398
Views
0
Helpful
1
Replies

VLAN Management

mansoor_nawaz78
Level 1
Level 1

How we can share a Bandwidth in a VLAN,

I mean share a Bandwidth in a single VALN Client,

can we do it through a IOS configuration or is there any hardware for this solution,

Note: Currently we are using L3(3550) & L2(2950) switches.

Thank You

1 Reply 1

ankurbhasin
Level 9
Level 9

Hi Mansoor,

On 3550 you can configure traffic-policing policies on the switch port for managing how much of the port bandwidth should be allocated to a specific traffic flow

http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a00801f0a4b.html

http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12120ea2/3550scg/swqos.htm#wp1024977

Just go through these links and see if this satisfies your requirement.

HTH, if yes please rate the post.

Ankur

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: