Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

2801 L2tpv3

hello, because 2801 cannot do vpls. can i use l2tpv3 to do layer2 tunneling in 2801? tx

3 REPLIES
Bronze

Re: 2801 L2tpv3

L2TP is an IETF standard that combines the best features of two existing tunneling protocols: the Cisco Layer 2 Forwarding (L2F) and Microsoft Point-to-Point Tunneling Protocol (PPTP).

Refer the following url for more info on L2TP support for 2801 router:

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6549/ps6587/prod_white_paper0900aecd8066d3f5.html

Re: 2801 L2tpv3

Hi Jimmy,

Yes you can, please use Cisco Feature Navigator to find information about Cisco IOS software images and the supported features for your platform(s) :

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

As for how to configure L2TPv3, please do check the following document:

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtl2tpv3.html

BR,

Mohammed Mahmoud.

Silver

Re: 2801 L2tpv3

use the given configuration

pseudowire-class abc

encapsulation l2tpv3

protocol l2tpv3

sequencing both

ip local interface loopback0

exit

interface gigaethernet0.410

encapsulation dot1q 410

xconnect x.y.z.k 410 pw-class abc

exit

regards

shivlu

399
Views
0
Helpful
3
Replies
CreatePlease to create content