04-28-2008 12:39 AM
Hi, I want to ask if there is any way to change the label or stop adveritise label for an static route. Normally LDP advertises an Implicit Null label for directly connected routes. We want to do similar thing for static routes.
We need to do this is because somehow we need to do rate-limit on the PE interface connecting to the core network instead of the interface connecting to CE. As the incoming packets still got labelled, the rate-limit is skipped. So we want to stop the PE creates label for the static routes or advertises them with implicit null label. Thanks in advance.
Solved! Go to Solution.
04-29-2008 05:03 AM
Calvin,
Bear in mind that if you only enter the "no mpls ldp advertise-label" command, LDP will stop propagating all labels, which might not ba what you want. If you selectively want to propagate certain labels, then you need to also use "mpls advertise label for
Regards,
04-28-2008 05:37 AM
you can create a acl and advertise the label only what you arelooking for.
no mpls advertise-label
mpls advertise label for
regards
shivlu
04-29-2008 12:31 AM
Thanks. "no mpls ldp advertise-label" works for me.
04-29-2008 05:03 AM
Calvin,
Bear in mind that if you only enter the "no mpls ldp advertise-label" command, LDP will stop propagating all labels, which might not ba what you want. If you selectively want to propagate certain labels, then you need to also use "mpls advertise label for
Regards,
04-29-2008 05:19 PM
Yes, I have both commands working for my case.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide