We have a MPLS based core network. At this stage they have 2 sites in Different cities. We configured xconnect for them. Both sites are ethernet based..Because it was point-to-point we configured xconnect..
Now they have a new site coming very soon and they want this third site to talk to other two sites.. The third site makes the whole scenario point-to-multipoint..
Correct me if i am wrong... for this to work i thought of VPLS as 1 valid option so that all 3 sites can talk to each other..
(My Network Doesnt have VPLS enabled yet.)
Is there any other way for these sites to communicate via MPLS cloud ?? any tricky or fancy way for these 3 sites ??
As per your suggestion, when customer will add a different vlan in that case a new ip subnet is required. But as per the requirement a same broadcast domain need to be extended. Please correct me if i am wrong.
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...