08-03-2012 06:04 AM
Hello,
I am testing VPLS service on the ASR1001. I have three of them directly connected in a full mesh with autodiscovery mode. On the first two ASR1K I have a switch connected in order to test the end-to-end reachability.
The VCs are in UP state, ICMP, SSH (unicast) is OK between the switch but multicast traffic is blocked.
Here are the relevant configuration sections:
l2 vfi VPLS-123 autodiscovery
vpn id 123
bridge-domain 123
!
router bgp 123
bgp log-neighbor-changes
bgp update-delay 1
no bgp default ipv4-unicast
neighbor 2.2.2.2 remote-as 123
neighbor 2.2.2.2 update-source Loopback0
neighbor 3.3.3.3 remote-as 123
neighbor 3.3.3.3 update-source Loopback0
!
address-family ipv4
exit-address-family
!
address-family l2vpn vpls
neighbor 2.2.2.2 activate
neighbor 2.2.2.2 send-community extended
neighbor 3.3.3.3 activate
neighbor 3.3.3.3 send-community extended
exit-address-family
!
Interface facing to the switch (CE)
!
interface GigabitEthernet0/0/3
no ip address
negotiation auto
service instance 123 ethernet
encapsulation default
bridge-domain 123
!
!
Thank you for your help!
Youssef
08-03-2012 11:57 PM
Hi Youssef,
What's IOS code which you are running? Seems like you are hitting DDTS CSCtz10928
fix of CSCtz10928 may be required to pass multicast traffic through vpls
You will need to upgrade your IOS to IOS-XE 3.7, which is 152-4S.
Sudeep
08-04-2012 02:32 AM
Hi Sudeep,
I am running IOS-XE 3.6.1S because it is the latest version for the ASR1001. I saw the version 3.7 but available for all ASR except the ASR1001.
Any idea when the 3.7 will be available for the ASR1001? Thanks
Youssef
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide