i am looking about some information about ASR 1001 with IDC:
1) I tried to use the configurator for ASR 1001 with IDC 2XOC3 (STM1) interfaces , but this option does not give me the option for SPA on the ASR 1001 , but when i tried ASR 1001 with IDC 4XT3 there is SPA available here, why there is no SPA slot available to configure with ASR 1001 2xOC3 (STM1) .
2) is the ASR 1001 and ASR1002 support VPLS , and what is the limitation if it is support it?
3) what is the maximum number of VPN (L3VPN) and what is the maximum route per VRF.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...